There are many ways to uninstall bloatware from a phone, but some people find it difficult to uninstall the apps they don’t use. This can slow down the overall performance of the phone.

There is no way to uninstall pre-installed apps on a smartphone, as they are ineffective and worthless. If you want to remove such apps from your device, you will need to read this article until the end.

Remove Bloatware from Mi 11X/Redmi K40/POCO F3

Pre-requisites

Step 1: Setup ADB and Fastboot

To use ADB, you need to install it on your computer. Then, you can use the following command to start it: adb start

Fastboot is a protocol that is used to re-flash the system partition on your Android device. It is a small yet powerful tool that comes with the Android SDK (Software Developer Kit), which is an alternative to all the recovery mode installations and updates. While re-flashing the system partition Fastboot requires a device with an unlocked bootloader. ..

Android devices do not all have a user-accessible Fastboot mode. Some Android devices may have a Fastboot mode after the device has been enabled by default. Independent Android developers and tech enthusiasts may make the Fastboot mode possible on some different phones. ..

If you are looking to set up fastboot and ADB in your operating system, we have written a comprehensive guide that will help you get started. Make sure to check it out to properly set it up!

To install Android Debug Bridge and Fastboot, follow these steps:

  1. Open a command prompt and type “adb” followed by the path to your Android SDK installation. For example, if you are using SDK 8.0.0, type “adb -s 8.0.0” .
  2. Type “fastboot” followed by the path to your Fastboot installation. For example, if you are using Fastboot 1.3, type “fastboot devices” .
  3. If you have not already installed ADB and Fastboot on your device, do so now by following these steps:
  4. Type “adb devices” to list all of your device’s ADB and Fastboot devices .
  5. Type “adb reboot” to reboot your device into ADB and Fastboot mode .

Step 2: Enable USB Debugging

To enable USB debugging on your Android device, you will need to access ‘Developer options’. Here is how to do it:

  1. Open the ‘Settings’ app on your device.
  2. Scroll down and tap on ‘Developer options’.
  3. If you have not already enabled USB debugging, tap on the ‘USB debugging’ option to turn it on.
  4. Next, you will need to allow the phone to connect to your computer using a USB cable. To do this, tap on the ‘OK’ button next to the ‘Connected via USB?’ message.
  5. Once your phone has been connected, you will see a message stating that ‘USB debugging is enabled’ and a green checkmark next to it. ..

Step 2: Select the ‘Apps’ tab and find the app you want to uninstall. Step 3: Click on the ‘Uninstall’ button and confirm your choice.

This will show all the specs for the product.

Step 3: simultaneously tap 4-5 times on the ‘MIUI Version’. You will be asked to enter your phone’s security lock. Now you will see a message reading, “You are now a developer”.

Developer options under Additional settings will now show. Tap on it to see more about it.

To enable USB debugging on your device, you will need to go to the ‘Debugging’ tab and select the option for ‘USB debugging’. This will allow you to easily enable USB debugging on your device.

Step 3: Get App Package Name

To remove the app by using the ADB shell, you should know the package name of the application. To identify the required package name of the application, you should download and install the app inspector application from the play store. To remove an app by using ADB shell, you can use one of two methods: either use a command line tool or use an app inspector application.

The package name for the pre-installed apps on the Galaxy S8 and S8+ have been released, but you can get the package names by yourself in case there are any changes. ..

Method 1: Using Fastboot Tool

Then, you will need to flash the stock firmware on your device. To flash the stock firmware, you will need to use Fastboot. Once you have flashed the stock firmware, you will need to reboot your device. Now, you can start using Fastboot to flash other files onto your device.

After downloading the .jar file, click on the file to install it on your system. (You may need to download and install the latest version of Java SE Development Kit as well.)

After the successful installation, connect your smartphone to your system and select the PTP mode. You may need to install the latest Xiaomi drivers as well. Now, open the install tool. The tool will show the list of all installed apps. Select the apps that you want to remove.Click on “Apply”.

Method 2: Using ADB Commands

adb shell getprop com.android.providers.telephony.service.TelephonyService This will give you the TelephonyService property, which you can use to connect to your phone’s telephony service.

adb shell service start adb shell service enable

Xiaomi Device > Remove Pre-installed Apps

Closing Phrase

Mi 11X/Redmi K40/POCO F3 users are in for a long and tedious process to remove bloatware from their devices. In this article, we will be providing you with the basic steps which will be required to Remove Bloatware from Mi 11X/Redmi K40/POCO F3. If you have any other queries or concerns, then please do not hesitate to comment down below and we will be more than happy to assist you.