Windows KB3126036 Silverlight update error is a problem that can occur when you try to install a new update for the Windows 10 operating system. This problem can be caused by a number of factors, but the most common cause is that the update is not compatible with your device. If you have this problem, you can try to fix it by following these steps:

  1. First, make sure that you are using the latest version of Windows 10. If you are not, then you should upgrade to the latest version as soon as possible.
  2. Next, open up your computer’s Control Panel and click on the “Update and Security” tab. Under " Updates," find and select KB3126036 Silverlight Update Error . Click on the “Install” button to start installation.
  3. After installation has finished, check for updates again and install any new ones that may have been released since KB3126036 Silverlight Update Error was installed. You may also want to check for security patches if they have been released recently.
  4. Finally, restart your computer if necessary so that all of the changes made in step 3 have taken effect.

Fix Windows KB3126036 Silverlight update error in Windows 10

By Running the Troubleshooter

Step 2: The Troubleshoot window will open. Step 3: In the Troubleshoot window, click on the “Windows Update” button. Step 4: In the Windows Update window, click on the “Check for updates” button. Step 5: In the Check for updates window, click on the “Update now” button. Step 6: The Windows Update process will start.

If you do not see the option for Windows Update troubleshooter, navigate to ‘Additional troubleshooters’, and click on it and you will find the ‘Windows Update’ troubleshooter.

The troubleshooter suggests fixes for you, so now you can apply them.

This will fix the problem for you.

By Rescheduling the Updates

  1. Open the Start Menu and type “cmd”.
  2. Type “shutdown” and hit enter.
  3. The shutdown process will start automatically and you will be able to see the results in a few seconds. If everything goes according to plan, the shutdown will be completed without any errors. If not, you can close down Windows updates by typing “shutdown -h now” into the command prompt and hit enter.

Step 2: Look for the Microsoft Windows Firewall and Security Center. Step 3: Click on the “Firewall” tab. Step 4: In the “Rules” section, click on the “Add Rule” button. Step 5: In the “Description” field, type a brief description of your rule. Step 6: Click on the “Add Rule” button. Step 7: In the “Details” field, type a brief description of your rule. Step 8: Click on the “Apply Rule” button.

Step 3: On the left side of the window, click on ‘Update’. Step 4: On the right side of the window, click on ‘Windows Update for Business’. Step 5: Click on ‘Next’ to continue.

In this step, we are disabling the service. We will then apply the changes and click OK.

Windows Update:

  1. Start your computer and follow the instructions.
  2. After following the instructions, restart your computer and follow “Step 1” and “Step 2.”

By Reinstalling Silverlight Program

If you have not been able to fix the problem with the two methods mentioned before, then it is most likely that your Silverlight Program is not installed on your PC. To fix this, you just have to visit the Microsoft Silverlight page and click on ‘Install for Windows’. The setup is very easy to install and shall fix the problem for you.

Deleting the Registry

The registry is a very important part of your computer and if you do not follow all the steps correctly, you might delete the wrong registry which can cause a lot of problems. Follow these steps carefully to make sure that you delete the right registry: 1. Open the Registry Editor and click on the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon 2. Type regedit and hit enter 3. In the resulting window, you will see a list of all the registry keys that are currently active. 4. Double-click on one of these keys to open it in the Registry Editor. 5. In this window, you will see a list of all the values that are currently stored in this key. 6. To delete a value, simply click on it and then press Delete . 7. To add a value, simply click on it and then press Add . 8. To remove a value, simply click on it and then press Remove .

Step 2: Type “cmd” and press Enter. Step 3: Type “netstat -an” and press Enter. Step 4: Type “ping 127.0.0.1” and press Enter. Step 5: If the ping results in a response, type “whois 127.0.0.1” and press Enter to view the results.

Step 3: Type in “password” and hit enter. Step 4: Click on the “edit” button. Step 5: In the “password” field, type in your new password. Step 6: Click on the “save” button.

Step 4: After entering your username and password, you will see the account control popup again. This time, tap on ‘Yes’ to continue. Step 5: The account will be created and you will be able to log in.

  1. Open the ‘HKEY_CLASSES_ROOT’ folder.
  2. Locate the ‘ShellEx’ key and open it.
  3. Right-click on the ‘ShellEx’ key and select New > DWORD (32-bit) Value.
  4. Name the new value ‘StartupNotify’ and set its value to 1. Now you are ready to configure your startup notification settings! To do this, open the ‘HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon’ registry key and locate the ‘StartupNotify’ DWORD value we created earlier. Set its value to a valid notification message that will be displayed when your computer starts up, such as “Your computer is starting up.” ..

Step 6: Choose the installer that you want to use. Step 7: Click on the ‘Install’ button.

Step 7: In the ‘Products’ section, click on the ‘Add New Product’ button. Step 8: Enter a name for your new product. Step 9: Click on the ‘Create Product’ button. Step 10: Your new product will be created and you will be able to see it in the ‘Products’ section.

The key to this code is D7314F9862C648A4DB8BE2A5B47BE100.

If the ‘Product Name’ key is not showing under the ‘Microsoft Silverlight’ registry key, then you may have selected the wrong registry key. To fix this, right-click on the key and click on ‘Delete’.

That’s it! Now you can install Microsoft Silverlight without any errors. ..

Windows KB3126036 Silverlight Update Error in Windows 10: How to fix it In order to fix the Windows KB3126036 Silverlight Update Error in Windows 10, you will need to try the methods listed below. If any of these methods don’t work, then you may need to reach out to a support representative for assistance.