The guide has been prepared by extensive research and considers all the factors that lead to the issue. You will find simple to complex solutions in the guide; follow it step by step, and even if one works, do not go for another. ..

What Do You Mean by MacBook Battery Not Charging?

-The battery is not charging -The indicator light on the battery is off -The MacBook Pro does not turn on -There is no sound coming from the MacBook Pro

  1. Safari
  2. Chrome
  3. Firefox
  4. Opera
  5. iCloud Drive
  6. Microsoft Edge
  7. Apple TVOS 11 ( tvOS 11 ) 8. macOS High Sierra 9. Windows 10

In the Status Bar, you will see a notification that reads “Battery is not charging.” In the Status Bar, you will see a notification that reads “No Battery Available.” On the MagSafe connector, you will see a green or orange light. Your MacBook’s Status Bar will indicate that the Battery is normal or fully charged; however, when you disconnect the charger, it will turn off suddenly. ..

If your MacBook is facing the Battery not charging issue, you can still turn it on when connected to a charger.

When you connect your MacBook to a power outlet, you will not see anything on your screen. This is because the MacBook is not connected to the power outlet in the traditional sense. Instead, it is using an adapter that connects to the wall. If you use the power button to turn on your MacBook, you will not see anything on your screen. This is because there is no electricity going through the connection between your computer and the wall.

Why is My MacBook Battery Not Charging? 

  1. The power cord
  2. The AC adapter
  3. The MacBook charger
  4. The user manual

A battery charger circuit SMC chip is used to charge batteries.

If your MacBook Air or MacBook Pro doesn’t charge, it may be because one of its components is facing a technical or mechanical problem.

A MagSafe or USB-C charger supplies power to your MacBook.The Battery is the storehouse of power.The Charging circuit transforms the Charger Beltane into power that could charge the battery and supply power to your MacBook.SMC (System Management Controller) regulates the charging circuit functionalities like charging or discharging your MacBook’s battery. ..

There are a few things that can cause your MacBook not to charge, such as a non-working charging circuit, faulty battery, or even inappropriate SMC. But the good news is that these issues are relatively easier to fix than you might think. If you notice any strange issue with your charging circuit, however, you might need to fix it carefully. We have got you covered with our guide. ..

  1. The battery is not charging because the power adapter is not working or the outlet is not working.
  2. The battery might be defective and needs to be replaced.
  3. There might be a problem with the power cord or outlet. ..

If you’re traveling and want to conserve power, consider using a low-power adapter. This will help to save your battery and keep your device running smoothly. ..

When using a low-power adapter, your adapter does not get the required power. In such a scenario, it’s difficult for the adapter to provide power to your MacBook. You do not get much power, so your MacBook’s battery gets charged. Suppose you are using a 45W adapter to a 15″ MacBook Pro that runs on 85W, then you are more likely to get the notification about the battery.

When you switch off your MacBook, the adapter will start charging it. However, if you use a flight adapter for your Mac, your device’s battery won’t charge whether it is off or not. This is because of the above reason, it is not recommended to charge your MacBook on a flight as the source’s bad contact will affect your MacBook’s performance and life. Suppose you use apps that consume much charging, like photo/video editing software, computer games, etc. In that case, your MacBook’s battery won’t charge as the power that the adapter fetch is constantly used. ..

Fix if Your MacBook Battery not Charging

The following are some of the causes of the issue:

  1. Poor research and development practices.
  2. Lack of accountability and transparency in the company’s operations.
  3. Ineffective communication channels between different departments within the company.
  4. Lack of coordination between different teams within the company.
  5. Poor leadership and management skills within the company.
  6. Unclear or outdated policies and procedures that hinder productivity and innovation in the company ..

If you follow the instructions carefully and try the methods, you can usually fix the issue. But if one method doesn’t work, go to the next one. Some methods require special hardware, while others don’t. ..

Inspect the Charging Port and MagSafe Connector

If you are a beginner, you can also follow this guide and solve the issue. Besides, you don’t need any spare parts for it. Check the charging port and the MagSafe connector well and check for burned marks or foreign substances.

To charge your connector and ports, you’ll need a magnetic force that can hold them to each other. The charging port, also being magnetic, can attract any debris like staples pins, paper clips, or any such thing. These things act as foreign bodies that intervene between the charger and MagSafe connector.

An extra resistor and a warmer connector will help to avoid electric sparks near the connector.

When inspecting and finding any burn marks on the port or connector, you should clean it well or possibly replace it to avoid any risks and save your device.

If you find debris near the charging port, it is best to use metal tweezers or a toothpick that can extract it out of the port. However, metal tweezers won’t lead to any short circuit as the adapter or the charging port does not have any power voltage in their mechanism at the point of contact.

If the charging port’s middle pin is not easily accessible, make sure there is no film covering it and that the pin is easily accessible. SMC uses the middle pin to connect to the MagSafe charger.

If there is a thin film of material near the port on your Mac, it will not allow you to charge your device using the MagSafe connector and the Mac will show only orange or green light.

It would help if you used a sharp knife to clean up the charging pin. Later on, use a cotton bud, and soak it in 95% alcohol to properly clean the pins.

Charging ports and plugs are more vulnerable to dirt and dust. Therefore, using cotton buds and alcohol will help you get rid of them.

Reset the SMC Chip

If you are a beginner and have not yet learned how to charge your MacBook, this article is for you. This guide will show you how to fix the slow or no-charge MacBook Charging procedure. MagSafe Charger or MacBook battery can be incorrect data that is reaching the SMC, which can cause the device to charge slowly or not at all.

  1. Open the Apple Menu and select System Preferences.
  2. In the System Preferences window, select the Battery tab.
  3. In the Battery preferences, select the “Non-removable battery” check box and click on the OK button to close the preferences window.
  4. To reset MacBook’s SMC using a non-removable battery, follow these steps:
  5. Open a Terminal window and type: sudo smc -l
  6. The output of smc -l will show that all MacBooks have been reset to their factory defaults since 2008!

To restart your MacBook, hold down the power button for 5 seconds or until the time indicator says “Off.” Afterward, connect a working MagSafe charger and then press the Shift-Control-Option located on the left side of the keyboard and the power button together for 10 seconds. Then release the buttons. Now turn on your MacBook. ..

If you have a MacBook with a removable battery, then follow the steps given below to reset your SMC. ..

Hold the MacBook’s power button till it turns off Disconnect the charger and remove the MacBook’s battery Now again, hold the Mac power button for a minimum of 5 secondsInstall your MacBook’s battery now

If your SMC does not work after resetting it, you can try the method below.

Reset NVRAM (Non-Volatile Random Access Memory)

The MacBook not charging issue can be caused by a corrupted NVRAM. To fix the issue, reset the NVRAM.

To reset NVRAM on a Mac, follow these steps:

  1. Open the “System Preferences” application.
  2. Click on the “Security & Privacy” icon.
  3. Click on the “General” tab.
  4. Click on the “Reset” button next to “NVRAM.”
  5. Enter your administrator password when prompted and click on the “Reset” button again to confirm your action. ..

To restart your MacBook:

  1. Hold down the power button until your MacBook turns off.

  2. Turn on your MacBook and when you see any light or hear any sound, quickly press the Control-Option-R-P keys together till your MacBook reboots.

  3. Afterward, release the keys. ..

  4. Check if the NVRAM is working by powering on your device and checking the screen to see if it shows any data. If it does not, then the NVRAM may be faulty and needs to be replaced.

  5. If the NVRAM is working, then follow these steps to fix it: a. Power off your device and remove all of the battery cells from it. b. Place your device in a known good location (like an outlet) and wait for a few minutes so that the power can reset itself. c. Once reset, turn on your device and check the screen to see if there are any data displays or messages that indicate that the NVRAM was successfully replaced.

Replace MacBook’s Battery

Apple has released a software update that will fix the hardware issue on MacBooks with battery issues. However, this update requires a new battery. ..

  1. Low Battery: This notification will appear when the battery is low and needs to be charged.
  2. Charging: This notification will appear when the battery is being charged.
  3. Fully Charged: This notification will appear when the battery is fully charged.
  4. Low Power: This notification will appear when the battery is running low on power and needs to be recharged soon.
  5. Not Charging: This notification will appear if the battery is not charging or if it has stopped charging for some reason. ..

When your device’s battery is less than 80% of its original capacity. Service Battery: Service Battery means that your device’s battery capacity has lessened below 80% of its original capacity. Besides, the battery life is 3-4 hours with its use here. So, you have an option to replace your device battery when feasible. Like you could wait for one or two years or connect to a charger every time, even if you wish to lower the battery use. It indicates that the Battery should be arranged as soon as possible. The message usually occurs when you have less than 50% of the original battery capacity remaining. Despite this fact, if you continue to use, then ensure that battery does not swell. Else, it will affect your MacBook’s spare parts and circuits

When you think of replacing the battery, you may reach out to any service center or try it yourself. But, when you want to order the battery, you have to search by the battery model instead of the MacBook model so that the appropriate one reaches out to you.

Remove the battery connector from the logic board by using a plastic stick to extract it. Be careful not to use any metal screwsdriver or metallic substances that could lead to a short circuit or a similar complication, thus destroying SMC.

Some MacBook models have batteries that are attached with screws, so if you are to disconnect them, use the apt screwdriver. When you order the battery online, it comes with a handy screwdriver most of the time.

Apple has glued up the batteries to the case in later models. In such a scenario, it becomes challenging for beginners to remove it. Besides, you need to pay attention to the logic board as well. Else, while removing the battery, some chips shall come out of the logic board, thus destroying it.

A MacBook with a USB-C charging port has two types of battery connections: the + and – terminals are held to the logic board, and a T-5 screw is used to connect them together. A flex cable connects the data lines to the logic board.

Removing a battery is an important task, but it can be challenging as well.

Remove the screws from the power terminals on the logic board. Disconnect the flex cable from the logic board.

If the data cable does not work, you may get the “No Battery” message. ..

How many cycles is a MacBook battery good for?

After a certain number of charging cycles, the performance of a MacBook may be affected. This is due to the battery’s ability to hold a charge for a longer period of time. For example, after 1,000 cycles, the battery should still be able to provide power for up to two years. ..

The Final Word

If you have any problems with your MacBook, please reach out to Apple Support or contact a technician as soon as possible. Delay the procedure will affect your MacBook’s life.